Harvey Industries designs and build a complete line of exhaust extraction equipment for any heavy duty applications.

AR Series Rubber Stack/Tailpipe Adapter A-Smooth bore mounting base for use with smooth bore hose. FMETG For use on vehicles with flush mount or recessed tailpipes. The wire form is installed in the tailpipe adapter and the flexible metal bar is inserted into the tailpipe to hold the hose and tailpipe adapter in place. Stainless

Harvey "Twist-Lock" Non-Crush Rubber Exhaust Hose Harvey "Twist-Lock" hose represents the latest advancements in technology and fabrication of rubber hose for our industry. Under normal service conditions, the hose is heat resistant in excess of 550‰. The "Twist-Lock" feature enables an individual to connect several lengths of hose together without the use of couplers. Note:

The Harvey Thru-The-Door System is designed for service stations and garages where the door is directly behind the vehicle. Harvey Door Ports are all cast aluminum for years of trouble-free service. They are supplied with all hardware necessary for installation. Thru-Wall Exhaust Systems are offered for installations requiring wall ports in place of door ports.

Housings, wheels, and frames are welded providing heavy construction and assuring solid, rattle-free units. Wheels are supported by heavy cast iron hubs and are static and dynamically balanced. Belt drive units are equipped with variable speed drives. Clockwise rotation wheel and bottom horizontal discharge housing is standard. Discharge may be changed to any one of

The body of the PS Floor Fitting is plastic molded from high-temperature resistant polyethylene. The top flange and lid of the PS Fitting is cast aluminum with the 5/16" thick lid having a tensile strength of 35,000 pounds. The lid is attached to the flange with a heavy-gauge, all stainless steel piano hinge for

An overhead system is easily installed in an existing or new building. A single drop is normally located at the side of the stall approximately 1" behind the rear vehicle bumper. The ductwork should be at an elevation of 15" to 16" A.F.F., which would then allow the standard 20" hose drop to attach to

The Harvey Automatic Retractable Hose Reel offers one of the most convenient methods available for extracting harmful exhaust fumes and gases from all types of service areas. The carbon spring-operated hose reel is designed for years of trouble-free service and can be adapted for use with ALL types of vehicles. The exhaust hose supplied

"TELESCOPICALLY®" Designed Over Exhaust Drop Model #TS-30 The Harvey model #TS-30 is "TELESCOPICALLY®" designed to simplify and improve upon existing overhead exhaust drops currently available. The #TS-30 consists of three lengths of lightweight, flexible tubing that slide one into another and give the appearance of only one 6" length of tubing attached to the overhead